After recently purchasing an Anycubic Photon, I thought I would share by little UV curing setup. I had some good luck finding parts that seemed to fit together.
Here is is with the light off, a bit easier to see.
This is all it took:
A nail drying UV lamp (the trifold design)
https://www.amazon.com/gp/product/B073HY93DP/
A similar trifold mirror (this would be the easiest to do yourself if you already have some small mirrors around
https://www.amazon.com/gp/product/B07PM4QQTN/
And a small display turntable that is SOLAR powered.
http://amazon.com/gp/product/B00N0V03SK/
The only part not listed here is the 3/4 inch thick Styrofoam I used to lift up the UV lamp a bit. I think thinking of printing something to take the place of it, but it works for now.
Cheers!